How to recondition pot medal carriage type porch lights ? - how install pot lights
I have to be used 8 porch lights, and in good condition, electric and reasonable. They were originally painted black, and flaking paint.
These lights are lights in the English language portal construction to transport.
The composition of the coin is POT MEDAL ..
I want to restore and install these lights in your house and yard.
What would be the best way to renovate these lights?
In other words, the whole procedure:
1-Cleaning
2-priming
3-painting.
Thank you.
Debby Jo.
Saturday, January 30, 2010
How Install Pot Lights How To Recondition Pot Medal Carriage Type Porch Lights ?
1 comment:
Clean - apart completely or as much as possible. Then wash with soap and water using a soft brush to get any dirt or in front of the cinema.
Purge - a proposal for the liquid sandpaper. The box is available in most hardware stores large and easy to use. Rub a cloth and wipe with a cloth. In this way you will not overdo it and sand in the metal industry.
Repaint - I'd fixative you use then follow with a few layers of light (not a thick coat) by Rustoleum. It is for this type of application and is also available in hardware stores. If you do not receive, the glass can always use a liquid sandpaper and buy the first and Rustoleum in a box. With an artist's brush. Mask that you can delete and runs as they occur. Remember, light layers of better than one thick coat!
Allow to dry between each step and if you dry thoroughly all, that they have taken out any liquid in the vicinity of the other electrical contact.
Since you have 8 of them will take one whIsland. Sounds like a winter project is good to me. Good luck!
Post a Comment